Philips HD2589 Mode D'emploi page 10

EnglisH
10
Problem
Is it possible to adjust
the browning level while
the toaster is working.
I cannot change the
browning setting when I
use the warming
function.
My roll or croissant is
too dark/ burnt.
I cannot change the
browning setting when I
use the reheat function.
The bread pops up
almost immediately
without having been
toasted.
There is an unpleasant
smell during toasting.
The toaster switches off
automatically.
The toasting lever
doesn't stay down.
I fail to get the same end
result when I toast two
different types of bread
at the same time.
Can I interrupt the
toasting process.
All manuals and user guides at all-guides.com
Cause
Fixed temperature for
warming function.
The roll or croissant may
not be put directly on
top of the toaster.
Fixed setting for reheat
function.
The toasting lever has
not been pushed down
all the way.
Malfunction.
Some dust may have
accumulated on the
heating elements.
The toaster has a feature
which will go into sleep
mode automatically if
you do not use the
appliance for 10 minutes.
The appliance is not
connected to the mains.
The toasting result for
different types of bread
may vary. The toasting
result depends on the
type of bread used,
thickness of the slices
and the condition of the
bread.
Solution
Yes, the browning level can be adjusted
during the toasting process by adjusting the
browning control.
Put the roll or croissant on the warming
rack.
Make sure you push the toasting lever
down all the way.
Take it to a service centre authorised by
Philips for examination.
Let the appliance complete a few toasting
cycles without slices of bread on the
highest browning setting in a properly
ventilated room.
Press any button to reactivate the toaster.
Connect the appliance to the mains.
To get the toasted bread you want it is
preferred to toast one type of bread at the
same time.
Yes, you can cancel the toasting process by
pressing the stop button.