Télécharger Imprimer la page

Eton BLACKOUT BUDDY Manuel Du Propriétaire page 10

Masquer les pouces Voir aussi pour BLACKOUT BUDDY:

Publicité

Les langues disponibles

Les langues disponibles

BLACKOUT BUDDY CO OWNER'S MANUAL
NOTE: You need to replace the CO alarm as soon as
possible when the CO alarm enters this status.
NOTE: The replacement date that appears on the CO
alarm is the date beyond which the CO alarm might no
longer detect carbon monoxide accurately and should be
immediately replaced.
4.2. 1 2 End-of-life reset
When the CO alarm enters the end-of-life warning state
in the first 30 days, press the button to reset the end-
of-life. At this point, if the CO alarm is still available, it will
enter the normal standby state for 24 hours, after 24
hours, the CO alarm will return to the end-of-life warning
state. After 30 days of the first end-of-life warning
state, the CO alarm can no longer be reset and needs to
be replaced in a timely manner.
4.3 Troubleshooting
CAUTION! - Do not attempt to repair the CO alarm. It
will affect your warranty.
If the CO alarm is not operating properly, and is still under
warranty, re turn it to the place of purchase. Pack it in a
well-padded carton, and ship to the place of purchase.
If the CO alarm is no longer under warranty, have
a licensed electrician replace it immediately with a
comparable alarm.
18
BLACKOUT BUDDY CO OWNER'S MANUAL
Troubleshooting Guide:
Problem
The CO alarm does
not sound when
TEST/SILENCE
button is pressed
The CO alarm chirps
once with FAULT
indicator (yellow)
flashing once every
40 seconds.
Method of disposal
1. Ensure CO alarm is powered
off.
Replace new battery and
confirm that it has normal
function after replacement.
2. The CO alarm is under "Fault
warning" mode.
Please ensure the CO alarm is
under "Normal operation" mode
then test the CO alarm.
3. Clean the CO alarm.
Please refer to "6. General
maintenance".
4. If there are still failures
during warranty, you can
return it to your retailer.
5. If the CO alarm is out of
warranty, please replace with
another new CO alarm.
LOW BATTERY VOLTAGE
SIGNAL
1. The battery is under low
battery status, please replace
the battery.
2. It may be that a backup
battery is n ot installed during
AC power supply. Please
confirm whether the battery
has been installed
19

Publicité

loading

Produits Connexes pour Eton BLACKOUT BUDDY

Ce manuel est également adapté pour:

Nbbco30w-sng