Publicité
Les langues disponibles
Les langues disponibles
6. (optional) If a 2.5" HDD is already installed, remove the HDD
cable before removing the bottom cover completely. Lift the
flap from the SATA connector (A), then remove the HDD cable
from the SATA connector (B).
7.
Align and insert the memory module into the slot (A) and press
it down (B) until it is securely seated in place. Repeat the same
steps to install the other memory module.
IMPORTANT! Always install into the lower slot first.
VivoMini UN Series
23
Publicité
