Optical Signal Transmission; Tv Box As External Storage - Conrad renkforce Android Quad Core Notice D'emploi

15. Optical signal transmission

You can transmit audio signals to compatible receiver devices (e.g. AV receiver) with an
optical connection via a TOSLINK cable.
Read the operating instructions of your receiver device before establishing
the optical connection.
Refer to "f) Toslink" on page 43 and establish the optical connection.

16. TV box as external storage

The TV box can be connected to a computer as external storage for data transfer.
Refer to "24. Technical Data" on page 58 regarding supported operating
systems.
By default, the device setting "Media Device (MTP)" is enabled. For you as the end user
it means that you can connect the TV box to a computer running a supported operating
system and immediately use it as a storage device.
However, if the connection is not automatically established upon connecting the device
to a compatible computer, then follow the instructions outlined below:
1. Turn on the TV box and wait until the homescreen appears.
2. Connect the TV box to a computer via the micro USB port (10) and a USB cable
(micro USB to USB-A).
3. Open [ Setting > Other > More Settings > Storage > > USB computer connection ]
and activate "Media Device (MTP)" .
4. The TV box will be listed as a drive and is available for data transfer on your
computer.
5. Disconnect the TV box from the computer after use.
52