Basic Steps And Settings; Turning On And Off; Display - Conrad renkforce Android Quad Core Notice D'emploi

12. Basic steps and settings

a) Turning on and off
1. Connect the power supply. See section "a) Power supply" on page 42 .
2. Connect the TV box to a TV or monitor. See section "b) HDMI" on page 42 . Turn
on the TV/monitor.
3. If desired, connect a mouse and keyboard. Refer to "d) USB (keyboard and mouse,
external storage media)" on page 42 and "b) Remote control" on page 45 .
4. Press the POWER button (1). The TV box boots up and the homescreen appears
after a few minutes. The status indicator turns blue.
5. Turn off the TV box after you have finished using it. Press and hold the POWER
button for about 10 seconds until the screen turns off.
• Turn off the power supply and remove the power adapter from the mains socket to
turn off the TV box completely.
b) Display
Various settings are available for image transfer.
1. Navigate to the TV box homescreen.
2. Open the [ Setting > Display ] settings window.
3. The following settings are available.
HDMI auto-detection
HDMI Output Mode Setting
Hide Status Bar
Display Position
46
The monitor size is determined automatically
by the TV box. Move the slide switch to "ON" to
activate the function.
Move the slide switch (HDMI auto-detection) to
"OFF" . Choose the required resolution.
You can display ( "ON" ) or hide ( "OFF" ) the status
bar using the slide switch.
Click on "Display Position" .
Make fine adjustments to the image size using the
"–/+" buttons.