Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
unfolded and the brake blocked during
all actions indicated below.
Place the Graco adapter on the frame (z1)
· There are two foldable attachment
points on both sides of the frame. Make
sure that the attachment points are in a
vertical position.
· There are two foldable attachment
points on both sides of the adapter.
Make sure that the attachment points
are in a vertical position.
· The side marked with 'R' is placed on
the right side of the frame, the side
marked 'L' is placed on the left side.
· Slide the adapter in the attachment parts
and press solidly until you hear a click.
Place the Graco car seat
· Orientate the Graco car seat such that
it is directed rearwards on the frame.
· Place the Graco on the adapter and
push it down until it firmly clicks. Pull
up on the Graco to be sure it is latched
firmly onto the adapter.
Remove the Graco car seat
· Squeeze the release handle at the back
of the Graco and lift it off the adapter.
Remove the Graco adapter
· Pull the unlock buttons on the inside of
the adapter upwards and vertically re-
move the adapter from the attachment
points.
· Fold the attachment points on both sides
of the adapter for compact storage.
The Maxi-Cosi car seat (option)
· The Maxi-Cosi car seat adapters are
suitable for use with the Maxi Cosi
Mico: 5-22 lbs. 19-22 in. (2,2-10 kg,
48-74 cm) and Maxi Cosi Prezi: 4-30
lbs., <29 in. (1.8-13.6 kg, <74cm).
· Always observe the instructions in the
manual of your Maxi-Cosi car seat be-
fore you start using the car seat.
· Make sure that the frame has fully been
unfolded and the brake blocked during
all actions indicated below.
Place the Maxi-Cosi adapters on the frame
· There are two foldable attachment
points on both sides of the frame. Make
sure that the attachment points are in a
vertical position.
· The adapter marked with 'R' is placed
on the right side of the frame, the adapt-
er marked 'L' is placed on the left side.
· Slide the adapters in the attachment
parts and press solidly until you hear a
click.
Place the Maxi-Cosi car seat on the
adapters
· Orientate the Maxi-Cosi car seat such
that it is directed rearwards on the frame.
· Hold the Maxi-Cosi car seat with the cen-
tral hinge points of the support bar di-
rectly above the adapters.
· Lower the Maxi-Cosi car seat and press sol-
idly into the adapters until you hear a click.
· Check that the Maxi-Cosi car seat has
been placed horizontally and has been
attached properly by trying to lift it
from the frame.
Remove the Maxi-Cosi car seat from the
adapters
· Operate the unlocking system of the
Maxi-Cosi car seat.
· Lift the Maxi-Cosi car seat straight up
from the frame.
Remove the Maxi-Cosi adapters from the
frame (z2)
· Pull the unlock buttons on the inside
of the adapters upwards and vertically
remove the adapters from the attach-
ment points.
English
17
Publicité
