PCM GSC1310-HF Mode D'emploi page 2

English
Included material:
1. 1x GSC1310-HF
2. 4x D912 M4x25
3. 2x D912 M5x12
Note:
All fixing screws shall be tightened to the
torques specified in the table below.
Standard quality: 8.8
Recommended torque for screws and bolts
Tightening torque [Nm]
Diameter
Class 5.8
M2 0.22
M3 0.77
M4 1.8
M5 3.6
M6 6.1
M8 15
Fixing the tool holder on the machine
To fix the tool holder, centre the shank in the
machine and tighten the fixing screws (2).
To fix your HF spindle, use the screws (3).
Zone industrielle C
Rte du Grammont 101
CH-1844 Villeneuve
Operating instructions
GSC1310-HF
Tool holder
Screw M4x25
Screw M5x12
Class 8.8 Class 10.9 Class 12.9
0.35 0.49 0.58
1.2 1.7 2.1
2.9 4 4.9
5.7 8.1 9.7
9.8 14 17
24 33 40
PCM Precision Tooling SA
Copyright © PCM Precision Tooling
Mode d'emploi
Betriebsanleitung
Use
1. -
2. -.
3. -
NOTE:
- Never use the chuck with empty
positions. Use the supplied plugs.
SWISS MADE
SA.
Document :
Garant:
GSC1310-HF Mode
BT
d'emploi.docx
Validation :
Page : 2 de 3
11.07.2023
Tél ++41 21 967 33 66
Fax ++41 21 960 38 95
http://www.pcm.ch
email: sales@pcm.ch