Aosom 370-112 Instructions De Montage page 4

Insert whole push bar into the hole of
the backrest, then turn the body over,
insert the snap ring and tight as picture
show.
US
If you have any questions, please contact our customer care center.
Our contact details are below:
001-877-644-9366
customerservice@aosom.com
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA
Assemble the cup holder with a screw by a
screwdriver (not included).
AA SIZE 1.5V
AA SIZE 1.5V
Loosen the screw with a screwdriver, keep the screw
in a safe place away from children's reach. Put 2 AA
size batteries in the battery house. Then tight the
screw with a screwdriver.
4
Assemble the safety bar into the
backrest by the thumb latch, then insert
the safety bar into the hole of safety bar
fixed part.