Maxtor SERIAL ATA HARD DRIVE Guide D'installation page 7

Remove System Cover
1. Turn your computer off.
2. Unplug your system from the electrical outlet.
3. Remove the cover from your system case. See Figure 3.
Refer to your system user
manual for instructions on
removing the cover, or obtain
the services of a qualified
installation technician.
4. Attach a grounding strap or touch a metal portion of your computer case. This will
ground you to minimize the risk of exposing the hard drive to electrostatic discharge.
Figure 3
Removing the System Cover
English
Remove System Cover 4