Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Feed
Pressure
Gravity
Dispose of hazardous fluid according to all local,
state, and national guidelines.
Always turn off the air supply and disconnect the air
supply hose before installing, removing or adjusting
any accessory on this tool, or before performing any
maintenance on this tool.
Clean spray gun and canisters immediately after use.
Paint or other fluids can dry quickly and can easily plug
internal passageways and render the spray gun useless.
Do not use Methylene chloride (Dichloromethane) or
any halogenated hydrocarbon solvents with this
spray gun.
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and the parts be separated by material so that they can be recycled.
P7744, Edition 1
INSTALLATION
Main Line(s) Inner Ø
to be 3X Size of
Air Tool's Inlet Ø
To Air
System
To Air
Tool
R
Emergency
Shut-Off
Valve
Regulator
Drain Regularly
SPECIFICATIONS
Maximum Air Pressure
psig
43
MAINTENANCE
SAVE THESE INSTRUCTIONS. DO NOT DESTROY.
Branch Line(s) Inner Ø
to be 2X Size of
Air Tool's Inlet Ø
F
Filter
Compressor
Inlet Connection
(Thread)
NPT
1/4"
Remove and empty the canister. Rinse canister with a
solvent recommended for the paint being used.
Fill canister with solvent and attach to spray gun. Spray
solvent into an approved container, while shaking the
gun vigorously. Continue until all traces of paint have
been eliminated from spray. Also wipe the exterior of
the gun with a rag soaked with the solvent.
Remove the air cap and soak in solvent. Use a toothpick
or plastic brush, to clean air passages.
Using metal objects can damage the precision air
passages. DO NOT soak spray gun in solvent. This
can damage non-metallic components.
After cleaning, lubricate lightly in the areas shown in
the exploded view with NON-SILICONE OIL.
Silicone oil can cause oil spots to occur in the paint.
4
(Dwg. TPD905-2a)
Minimum Inside (Ø)
(Air Hose)
in (mm)
5/16 (8)
Publicité
