IVT EFHC-2000 Mode D'emploi page 8

Instruction manual
∙ To avoid danger, damaged power cord should be
replaced by manufacturer or its agent, or similar qualified
person.
∙ Immediately unplug the tool when its cable is
EN
damaged or cut.
ATTENTION! DANGER OF ELECTRIC
SHOCK!
Consider working area environment. Do not expose
power tools to rain. Do not use power tools in damp
or wet locations. Keep work area well lit and dry. Try
to prevent the device from getting wet or being
exposed to humidity. Do not leave it outside
overnight. Water entering a power tool will increase
the risk of electric shock.
∙ The power supply cable should be checked regularly
and, before using it, make sure the cable is not damaged
or worn out. If the cable is not in good condition, do
not use the appliance; take it to an authorized service
centre.
∙ When tool is used outdoor, only use an extension
cable that is suitable for outdoor use and which is
marked for this specific use. Keep it away from the
working area, from damp, wet or oily surfaces and away
from heat and flammable materials.
∙ Avoid any accidental starting: make sure that the
power switch (if present) is in the «off» position, before
plugging the tool in.
∙ Remove adjusting keys or wrenches before turning
the tool on.
∙ Do not use the tool if the switch does not turn the
tool on or off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
WARNING! During the use of certain
power tools, some dust containing
chemicals known to cause cancer,
may occur.
Some of these chemicals are: lead from lead based
paints, crystalline silica from bricks and cement and
other masonry products, arsenic and chromium from
chemically treated lumber and other dangerous
products. If dust is present, your risk from these
exposures varies, depending on how often you do this
type of work. To reduce your exposure to these
chemicals, any time you do pulverulent operations,
work in a well ventilated area and work with
approved safety equipment, such as dust masks
that are specially designed to filter out microscopic
particles.
All manuals and user guides at all-guides.com
∙ If the appliance strikes a foreign body, examine the
device for signs of damage and carry out any necessary
repairs before restarting and continuing to work.
∙ If the appliance starts to vibrate abnormally, turn it
off and check for the cause immediately. Vibration is
generally a warning of trouble.
∙ Always switch off the appliance and wait until the
device completely stops whenever you leave the
machine, before carrying out maintenance, before
checking, cleaning or working on the appliance.
∙ It is forbidden to move or modify any of the internal
parts of the device.
Specific safety rules
∙ Do not cover: fire danger exists if the equipment is
covered.
Do not use the machine in case of relative humidity
∙
above 80%.
∙ Keep inflammable materials at a minimum safety
distance of 3 meters.
∙ Do not use the machine in fire hazardous areas!
Do not use the machine outdoors in rainy weather!
∙
∙ The machine must only be disassembled by the
manufactory or by a qualified person!
∙ The machine must not be located immediately
below a socket-outlet.
∙ Do not use the machine with a programmer,
timer or any other device that switches the heater on
automatically, since a fire risk exists if the heater is
covered or positioned incorrectly.
∙ Don't use the machine in the immediate surroundings
of a bath, a shower or a swimming pool.
∙ If the supply cord is damaged, it must be replaced
by the manufacturer or a qualified person in order to
avoid any hazard.
∙ The machine is to be placed on the floor.
∙ The fan heater can be used in areas of both
moderate and cold climates with temperatures ranging
from -10°C up to +40°C excluding conditions where
the power cable may be exposed to precipitation or
humidity.
∙ Do not use the machine for a period up to 24 hours; in
this case overheating danger exist: switch immediately
off and let the machine cool down for 2 hours.
UNPACKING
When unpacking, check to make sure that all
components are included. Refer to the drawings on this
manual. If any parts are missing or broken, please call
IVT assistance center.
8