CAMPARK T20 Manuel D'instructions page 11

All manuals and user guides at all-guides.com
▲ 1. The monitor is only switched on in the SETUP mode for changing
menu settings or viewing existing photos and videos.
2. A SD memory card must have been inserted into the memory card
slot to save photos and videos.
3. Using the mini USB connection (USB 2.0), the camera can be
connected to a computer to download photos and videos.
4. Using the mode switch, the three operating modes:OFF,SETUP and
ON can be selected.
4. PREPARING THE CAMERA
Note :
1. SD memory cards up to a capacity of 32 GB are supported.
x4
2. 4 new LR6（AA）
Batteries with tghe same specification.
3. The camera must be inserted 4 x 1.5V AA batteries . Do not use
new and old batteries together. DC interface need 6V/1.5A adaptor
with 3.5 mm (outer diameter) 1.3 mm (inner) plug head.
4. Insert CLASS6 or higher class SD card ( CLASS10 recommend).
Prior to insert into memory card, ensure that the lateral write protection
on the memory card has not been locked.
x1 x1
5
EN