Nicols PAR COB 100 MW Mode D'emploi page 5

Press "MODE" until the LED display shows
The fixture can automatically identify the DMX signal. If the signal is well received, the third digit of LED
display will flash. If the DMX signal disappears, the previous mode will be restored.
a) Press a few seconds on "MODE", when the LED display shows
"UP" or "DOWN" to adjust the DMX address. Press "MODE" to go back to the previous menu
b) Press a few seconds on "MODE", when the LED display shows a signal ending with
the button. Use "UP" or "DOWN" to adjust current DMX mode. Press "MODE" to go back to the
previous menu
DMX mode 1: 2CH
CHANNELS NUMBER
1
2
DMX mode 2: 6CH
CHANNELS NUMBER
1 0-255
2 0-255
0-255
0-24
3
25-49
50-74
4 75-99
100-124
125-149
150-174
175-255
0-255
5
0-255
0--19
6
20-255
All manuals and user guides at all-guides.com
DMX mode function of 2CH
0-255
0-255
DMX mode function of 6
CH
Built-in program speed, the larger value, the faster speed
LED strobe, the larger value,the faster speed
001-255
FUNCTION
CW Brightness
WW Brightness
FUNCTION
CW Brightness
WW Brightness
Master Dimming
No Function
Auto run
Pr 2 CW dimming
Pr 3 WW dimming
Pr 4 CW.WW dimming
Pr 5 CW.WW dimming
Pr 6 CW.WW hopping
Sound Active
Sound Sensitivity
LED no strobe
, release the button. Use
CH
, release
4