Publicité
1. Turn the device on by pressing
2.If the fuel tank is empty (START/STOP BUTTON BLUE LIGHT ON), open the flap and pull out the fuel hose
the loose end in the fuel container and press and hold the fuel pump button (II).
3.If the tank fills up (START/STOP BUTTON GREEN LIGHT ON) put the fuel hose back in place. (III)
When the START/STOP button is lit up in green, the device is ready to be launched.
Press START. Firing up of the device takes from 2 to 10 minutes (FLASHING GREEN LIGHT). During the process of
firing up, scent of fumes can be present. When the lights stop flashing, the device is lit up and has reached the working
temperature.
When the flame is on, press the
one of the six flame heights. The flame starts on height 4 by default.
NOTE. In case of too high a temperature of the device, the flame height will be automatically decreased and locked
from changing. If the temperature continues to increase, the flame will be extinguished (RED LIGHT)
To extinguish the flame:
-press STOP.
Flashing red light indicated the device being cooled. Restarting the flame is possible only after complete cooldown of
the device (GREEN LIGHT).
To turn the device OFF, press
The device will automatically turn off in case of any work related errors. (check the error in the mobile app).
REPLACING FUEL CONTAINER
.
I
FLAME IGNITION
FLAME HEIGHT REGULATION
or
button on the remote or scroll the flame level bar in the mobile app to choose
FLAME EXTINGUISHING
TURNING THE DEVICE OFF
.
10
II
III
(I)
. Place
Publicité
