Publicité
Les langues disponibles
Les langues disponibles
EN
2. BLUETOOTH WIRELESS DIGITAL CONNECTION (DEPENDING ON THE MODEL*)
Some Elipson's turntable are equipped with an aptX Bluetooth transmitter for your wireless
equipped with a volume control, that you will need to adjust to a low volume before use.
both devices. You have to do this once for each Bluetooth receiver.
WARNING ! To allow the internal stabilization of the pre-amp circuit, the Bluetooth transmis-
sion module will automatically switch on about 25 seconds after the turntable is started.
You can then proceed to the pairing operation by following the instructions on page 30 of
the manual.
1 : Bluetooth pairing button
2 : Bluetooth activity indicator with a blue LED
First use :
• Shortly press the pairing button on the turntable.
• Press the pairing button of the receiver.
• Wait for pairing between both devices.
The turntable's blue LED remains on.
Your Bluetooth receiver is now connected to the turntable.
Daily use :
(or if the turntable has been turned off / unplugged (due to a power failure for instance)) :
• Check that the receiver is on.
• Plug in the turntable.
• The pairing between both devices is automatic.
The turntable's blue LED remains on.
Your Bluetooth receiver is now connected to the turntable.
* models with Bluetooth connection : Alpha 100 RIAA BT, Omega 100 RIAA BT, Omega 100 RIAA BT Carbon Black
All manuals and user guides at all-guides.com
1
(after a delay of about 25sec).
(after a delay of about 25sec).
2
30
Publicité
