Publicité
Les langues disponibles
Les langues disponibles
Snap nut and collet together by firmly applying
downward pressure into assembly with palm of
hand (Fig. 3).
To reduce the risk of injury, always unplug tool before
Fig. 3
To reduce the risk of injury, wear safety goggles or
glasses with side shields.
attaching or removing accessories or making
adjustments. Use only specifically recommended
accessories. Others may be hazardous.
INSTALLING THE MOTOR INTO THE LIFT
To install the motor into a router lift, read, understand, and
follow the instructions packaged with the router lift.
To reduce the risk of injury, use only the
following router tables and lifts with this
motor.
JessEm Mast-R-Lift II™ #02120, #02121
JessEm Mast-R-Lift™ #02101, #02102
JessEm Mast-R-Lift Excel II™ #02202
JessEm Mast-R-Lift Excel™ #02201
Using other tables and lifts may not properly secure
the Router Table Motor with Remote Power. An
improperly secured motor increases the risk of injury
or product damage.
To remove collet from nut, hold nut firmly with one
hand and press the collet to one side with the other
hand (Fig. 4).
W ARNING
W ARNING
Fig. 4
Publicité
