Grandstream Networks GWN7660LR Guide D'installation Rapide page 3

OVERVIEW
EN
The GWN7660LR is an outdoor 802.11ax 2×2:2 Wi-Fi 6 access point for
medium-to-large businesses and enterprises who need to provide long-
range coverage in both indoor and outdoor spaces. It offers weather-
proof casing and heat resistant technology, dual-band 2×2:2 MU-MIMO
with DL/UL OFDMA technology and a sophisticated antenna design for
maximum network through that supports 256 clients and an expanded
250-meter coverage range. To ensure easy installation and manage-
ment, the GWN7660LR includes a built-in controller embedded within the
product's web user interface. It is also supported by GWN.Cloud, Grand-
stream's free cloud Wi-Fi management platform. The GWN7660LR is the
ideal Wi-Fi AP for voice-over-Wi-Fi deployment and offers a seamless
connection with Grandstream's Wi-Fi capable voice and video IP phones.
With support for advanced QoS, low-latency real-time applications, mesh
networks, captive portals and dual Gigabit networks ports with PoE/
PoE+, the GWN7660LR is an ideal outdoor Wi-Fi access point for enter-
prises, multiple floor offices, warehouses, hospitals, schools and more.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of -30° to
60° for operating and -30° to 70° for storage.
• Do not expose the GWN7660LR to environments outside of the fol-
lowing humidity range: 5-95% RH (non-condensing).
• Do not power cycle your GWN7660LR access point during system
boot up or firmware upgrade. You may corrupt firmware images and
cause the unit to malfunction.
• Please take lightning protection measures during installation (a light-
ning rod is required and the device must be reliably grounded). It is
recommended to use a surge protection device.
PACKAGE CONTENTS
1x Base Bracket
2x Antennas
GWN7660LR Access point
2x Metal Straps
1x Quick Installation
Guide
4x Screws (PM 3.0 x 7)
4x Expansion Screws
~1~
GWN7660LR PORTS
Port Description
NET/POE Ethernet RJ45 port (10/100/1000Mbps) supporting PoE/
PoE+.
NET Ethernet RJ45 port (10/100/1000Mbps) to your router or
another GWN76xx.
RESET Factory reset button.
Press for 7 seconds to reset factory default settings.
POWERING AND CONNECTING THE GWN7660LR
GWN7660LR can be powered on using PoE/PoE+ switch using follow-
ing steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of GWN-
7660LR.
Step 2: Plug the other end into the uplink port of the power over Ethernet
(PoE/PoE+) switch.
Network Port
HARDWARE INSTALLATION
GWN7660LR can be mounted on the wall or on a metal bar, Please
refer to the following steps for the appropriate installation.
~2~
RJ45 Ethernet Cable
to power over Ethernet
(PoE/PoE+) Switch