Publicité
Les langues disponibles
Les langues disponibles
Battery Installation
1. Put the battery on the battery frame (Note: the pole faces inside the frame).
2. Hang one end of the tie rod in the holes both sides of the battery, then screw the other end
through the holes of fixing board.
3. Keep the fixing board to the edge of opposite side of poles.
4. Spin the nut on the tie rod and reinforce it.
5. Connect the anode wire on the anode pole and cover the red rubber lagging on the anode
pole. Connect the negative wire on the negative pole and cover the black rubber lagging on
the negative pole.
Battery Assembly Breakdown
All manuals and user guides at all-guides.com
15
Owner's Manual
Retaining Frame
Battery (with a rating of 12V-9AH)
Publicité
