Publicité
Liens rapides
Publicité
Manuels Connexes pour National Instruments NI cDAQTM-9179
Sommaire des Matières pour National Instruments NI cDAQTM-9179
- Page 1 cDAQ-9179...
- Page 2 For patents covering National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patents Notice at ni.com/patents. You can find information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product.
- Page 4 NI LabVIEW NI-DAQmx First, install application development software (if applicable). Then install NI-DAQmx driver Connect the cDAQ chassis to earth ground. Then install I/O modules. Refer to the module software. operating instructions for signal connections. Commencez par installer le logiciel de développement d’applications (le cas échéant). Connectez le châssis cDAQ à...
- Page 5 Measurement & Automation Explorer (NI MAX) Connect the power supply. Then connect the cDAQ chassis to a USB port on your Take your first measurement in MAX. Right-click any module and select Test Panels. computer. For best performance, use a USB 3.0 port. Configure the measurement settings and click Start.