Télécharger Imprimer la page

Polaris 2879201 Mode D'emploi page 6

Publicité

Les langues disponibles

Les langues disponibles

EXTREME FRONT BUMPER
KIT PN 2879201
6. Preassemble the upper left f and right g sections
onto the upper middle section e using
Allen socket machine screws b and
20 mm
flat washers d (finger tighten at this time).
6
7. Position and fasten the assembly upper section e
onto the lower middle section j using
Allen socket machine screws b and
20 mm
washers d.
8. Fasten the left k and right l supports to the
vehicle using the two existing M10-1.5 bolts and the
two existing M10-1.5 nuts removed in step 2 (finger
tighten at this time).
7515286-458E
A-7515286 Rev. A
All manuals and user guides at all-guides.com
(12) M6-1.0 X
(12) M6
7
5
(2) M6-1.0 X
flat
(2) M6
9. Position and fasten the lower left h and right i
tubes using
(8) M6-1.0 X 20 mm
screws b and
(8) M6
10. Tighten all bolts, machine screws, and nuts.
11. If you removed a roller guide in step 1, reinstall it.
10
- 3-
Allen socket machine
flat washers d.
5
The mounting
holes on the top of
the upper middle
section e are used
to the installation of
accessory lights (see
the Polaris accessory
catalog).
Printed in China

Publicité

loading