GadgetMonster GDM-1051 Mode D'emploi page 9

Remote control
1.
2.
3.
4.
5.
1. Function LED
2. Rise / go up
3. Forward
4. Backward
5. Power switch (on/off)
6. Charge LED
7. Dive / go down
8. Turn left
9. Turn right
The function LED will turn on when you press any button.
Press forward (3.), to make the submarine go forward.
Press backward (4.), to make the submarine go backward.
Press right (9.) or left (8.) to make it turn right or left.
Press dive (7.) to make the submarine dive.
The submarine must be submerged in water for the commands to
work.
Troubleshooting
If the submarine is getting slow, it means it has low battery.
For clarification: The submarine needs to be filled with water in the
front and rear. But not on the inside.
1. Drain hole
If there is water inside the product, the submarine will lose its balan-
ce. Drain the water via the drain hole(1.). You may get out more
water if you shake it.
In the beginning, if the function time is less then expected, it might
help if you do a full charge and full discharge for 8 times. It might
recover battery life.
If the submarine is not receiving commands correctly, there might
be radio interference from other sources. Try moving to another
6.
7.
8.
9.
9