Publicité
Les langues disponibles
Les langues disponibles
CLEANING
•
Always disconnect the appliance from the power outlet before cleaning. Never immerse the
kettle, power cord or power base in water, or allow moisture to contact with these parts.
•
Wipe the appearance of body with a damp cloth or cleaner, never use a poisonous cleaner.
•
Remember to clean the filter at intervals. For easier cleaning, detach the filter and then replace
it after cleaning.
•
Le filtre se détache pour un nettoyage plus aisé, en tirant dessus. Pour le replacer, insérer le
filtre dans les fentes.
WARNING
Do not use chemical, steel, wooden or abrasive cleaners to clean the outside of the
kettle to prevent the gloss loss.
•
When not use or storage, the power cord may be wound under the bottom of kettle.
REMOVAL OF MINERAL DEPOSITS
Your kettle should be periodically descaled as the mineral deposits in tap water may form scale
on the bottom of kettle so as to cause the operation less efficiency. You can use the commercially
available descaler and follow the instructions on the package of descaler. Alternatively, you may
follow below instructions using the white vinegar.
1.
Fill the kettle with 3 cups of white vinegar, then adding water to the amount so as to cover the
bottom of kettle completely. Leave the solution in the kettle overnight.
2.
Then discard the mixture in the kettle, then filling the kettle with clean water, boiling and then
discard the water. Repeat several times until the odor of vinegar has been flushes away. Any
stains remaining inside the spout can be removed by rubbing with a damp cloth.
16
Publicité
