Télécharger Imprimer la page

Renkforce 2160806 Mode D'emploi page 3

Casque de jeu avec son surround 7.1 équipé de del

Publicité

Les langues disponibles

Les langues disponibles

Operating instructions
7.1 surround sound gaming headset with LEDs
Item no. 2160806
Intended use
The product is intended for use as a headphone with microphone and is suitable for connection
via a USB port to a computer, or other digital audio devices or game consoles. The software
available for the product (only for Windows-based computers running on Windows 7 or later)
can be downloaded from the product website www.conrad.com.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product
for purposes other than those described above may damage the product. In addition, improper
use can cause hazards such as short circuits or fire. Read the instructions carefully and store
them in a safe place. Only make this product available to third parties together with its operating
instructions.
This product complies with statutory, national and European regulations. All company and pro-
duct names are trademarks of their respective owners. All rights reserved.
Package contents
• Headset
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of symbols
An exclamation mark in a triangle indicates important instructions in this operating
manual which absolutely have to be observed.
The arrow symbol indicates special information and advice on how to use the pro-
duct.
Safety instructions
Read the operating instructions and safety information carefully. If you do not
follow the safety information and information on proper handling in these op-
erating instructions, we will assume no liability for any resulting personal in-
jury or damage to property. Such cases will invalidate the warranty/guarantee.
• This device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a dange-
rous plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Always observe the safety information and operating instructions of any other de-
vices which are connected to the product.
• Do not listen to music at an excessive volume for prolonged periods. This may
damage your hearing.
• Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
• Maintenance, modifications and repairs must be carried out by a technician or a
specialist repair centre.
• If you have any questions which are not answered in these operating instructions,
contact our technical support service or other technical personnel.
All manuals and user guides at all-guides.com
Product overview
1 Adjustable headband
2 Left earcup
3 Right earcup
4 Microphone
5 Volume control
6 Microphone on/off switch
7 Lighting on/off switch
Getting started, use
a) Downloading and installing the software
• To use the virtual 7.1 surround sound function of the gaming headset, you need to download
• When the download is complete, install the software (if necessary, unzip it to a directory first).
• After completing the installation, connect the gaming headset to the computer, as described
b) Connection
• Insert the USB-A plug on the cable into a free USB port of your computer. The computer does
• The operating system will recognise new hardware and install the necessary drivers (these
c) Putting on the headset
• First turn the volume down with the volume control (5).
• Put the gaming headset on so that the microphone is on the left side. You can adjust the
d) Adjusting the volume
Use the volume control (5) to set the desired volume for playback via the headphones:
• Turn in the "+" direction: Increase the volume
• Turn in the "-" direction: Decrease the volume
e) Switching the microphone on/off
Use the slide switch (6) to switch the microphone on or off. A LED at the top of the microphone
(4) indicates the current status:
• LED on: Microphone switched on
• LED is off: Microphone switched off
f) Switching the light on/off
Use the slide switch (7) to switch the LED lighting of the two earcups on or off.
4
the software (only for Windows-based computers running on Windows 7 or later) from the
product website www.conrad.com.
Make sure that the headset is not connected to the USB port on your computer
before you start the software installation.
Follow all software or Windows' instructions.
in the next section. Then you can make various individual settings in the software.
not need to be switched off.
are included in the operating system).
width of the headband (1) by pulling apart the left and right earcups (2+3). You can place
the microphone (4) in front of or next to your mouth as desired using the flexible bracket.
The microphone volume must be adjusted via the volume control in the operating
system.
1
2
3
5
6
7

Publicité

loading