Publicité
Les langues disponibles
Les langues disponibles
Installation
Attach the Cables to the LCD and Bracket
1
Attach the supplied right angle DB9 connector to the LCD display and the DB9 cable from the unit to the right angle
adapter. Then connect the power cable to the LCD display.
2
Secure the cables to the display bracket using zip ties (user supplied).
3
Cable routing:
• It is up to the end user to determine the best routing method for the rack in use.
• Cables should be secured to the rack near the connection point on the SRCOOL3KTP to prevent accidental
disconnection.
• If cables are routed through existing openings or openings added by the user, care should be taken to make sure
there are no sharp edges that can damage the cables.
Bracket placement:
• The bracket uses magnets to attach to the surface of the rack.
• It is recommended to place the display in a place on the rack that it is easily visible.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and
illustrations may differ slightly from actual products.
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
3
22-03-047 93-419B_RevA
Publicité
