Measuring Unit; Language; Lcd-Contrast - KERN and SOHN YKT-01 Mode D'emploi

6.13

Measuring unit

The desired measuring unit can be selected.
After having made the selection the following appears on the display:
With
▲ ▲ ▲ ▲ ▲
▼ ▼ ▼ ▼ ▼
can be switched to:
or:
or:
Meas. unit „——„ means that the measuring value will be issued without measuring unit
STAT
With the Weight unit can be freely edited, see chapter 7.3
Attention: If the measuring unit is changed, both tolerance limits are automatically set to zero
without Error message.
6.14

Language

Ther desired language can be selected.
After having made the selection the following appears on the display:
▲ ▲ ▲ ▲ ▲
▼ ▼ ▼ ▼ ▼
With
can be switched to:
or :
6.15

LCD-contrast

The contrast of the display has 17 levels and can be altered to the personal requirements of
the user. After having made the selection the following appears on the display:
▲ ▲ ▲ ▲ ▲
With the LCD-contrast can be altered from 0 to 16.
▼ ▼ ▼ ▼ ▼
M e a s . u n i t
M e a s . u n i t
M e a s . u n i t
( S t a t )
M e a s . u n i t
L a n g u a g e
D e u t s c h
L a n g u a g e
E n g l i s h
L a n g u a g e
F rancais
L C D - c o n t r a s t
m g
(kg,t,ct,lb)
g
<xxxx>
_ _ _ _
9
63