Protelx GPO RYDELL Mode D'emploi page 10

SNOOZE FUNCTION
When the Alarm activates, Press the SLEEP/SNOOZE/ALARM button.
Then the alarm will turn off and will ring again 5 minutes later.
SET THE SLEEP TIMER
1. With the UNIT switched ON and playing any of the inputs i.e. DAB or
FM , Press and hold the SLEEP/SNOOZE/ALARM button until the
Sleep menu is shown.
2. The minutes are now flashing. Short Press SLEEP button to change
the Sleep time (such as 15mins, 30mins ,45mins, 60mins, 90mins)
3. Available Sleep time is 15 to 90 minutes, in 15 minutes increments.
Set the required time and short Press AUTO SCAN/ENTER button to
confirm.
4. The display will show the settings sleep time on the right upper
corner. The UNIT plays for the selected time and then switches to
Standby.
CANCEL SLEEP TIMER
1. With the UNIT switched ON and playing any of the inputs i.e. DAB or
FM, Press and hold the SLEEP/SNOOZE/ALARM button until the
Sleep menu is shown.
2. The minutes are now flashing. Short Press SLEEP/SNOOZE/ALARM
button to change the Sleep time to OFF and press AUTO
SCAN/ENTER button to confirm.
SYSTEM RESET
System Reset can be used to clear the station list, the presets and all
Alarm and Sleep settings. This is useful if you move the UNIT to a
different location (when you move house for instance) as some stations
may not be available in the new area.
1. In DAB mode, Press the SETUP button then press UP/DOWN
button to select DAB MAIN MEMU. Press the AUTO SCAN/ENTER
button to confirm.
10
GPO_Rydell_DAB_EU_Manual.indd 10
All manuals and user guides at all-guides.com
2. In M
Fac
tim
3. The
a q
Pr
Vent
or po
exam
or si
in a
impe
Hea
such
(inclu
Pow
type
sure
prod
oper
instr
P
Loo
safe
The
devi
28/09/2016 08:50