Monster ClarityHD 100 Mode D'emploi page 9

ENGLISH
NOte: When connected to a Blackberry, if you push the
library will begin to play. This function is disabled during an incoming call.
Connecting to a device Via 3.5 mm "AUdIO IN" Input
You can use ClarityHD Precision Micro Bluetooth Speaker for music
playback with any device that has a 3.5 mm headphone port.
You will need a 3.5 mm to 3.5 mm minijack cable (not included).
Simply plug one end of the cable into your device, as you would a pair
of headphones. Plug the other end of the cable into the 3.5 mm port
marked "AUDIO IN" on the back of ClarityHD Precision Micro Bluetooth
Speaker. Play music.
16
All manuals and user guides at all-guides.com
, the first track in your music
Controlling Volume When Connected Via 3.5 mm "AUdIO IN" Input:
NOte: Volume cannot be controlled with the volume control on ClarityHD Precision Micro
Bluetooth Speaker when connected via the 3.5 mm "AUDIO IN" input. Use the volume
control on your device as you normally would.
recharging Battery
Make sure the power switch is set to "ON." Plug the Mini USB end
of the included USB cable into the USB mini port, marked "USB
Charging" on the back of ClarityHD Precision Micro Bluetooth
Speaker. Plug the other end into a USB port on your computer
or other devices made for USB charging. The LED light will begin
to flash BLUE. It will stop flashing at full charge. Charge time
is 3 hours from an empty battery.
NOte: Always be sure to switch ClarityHD Precision Micro Bluetooth
Speaker to the "OFF" position when not in use to save battery charge.
ENGLISH
17