Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Caution
-
Only connect the appliance to an earthed wall socket.
-
Always place and use the appliance on a stable, level and horizontal
surface. If you prefer to place the iron on its heel, make sure that you
place it on a stable surface.
-
Check the mains cord regularly for possible damage.
-
Fully unwind the mains cord before you plug it in the wall socket.
-
The soleplate of the iron can become extremely hot and may cause
burns if touched.
-
When you have finished ironing, when you clean the appliance, when
you leave the iron even for a short while and also during water filling:
put the iron in horizontal position or on its heel on a stable surface and
remove the mains plug from the wall socket.
-
Do not put perfume, vinegar, starch, descaling agents, ironing aids or
other chemicals in the water tank.
-
This appliance is intended for indoor household use only.
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientific evidence
available today.
Disposal
-
Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment.
-
To make recycling possible, the plastic parts used for this appliance
have been coded. The cardboard packaging is made of 90% recycled
material and is fully recyclable.
Introduction
Thank you for buying this Philips appliance.
-
The new Philips PerfectCare Xpress steam iron offers you an innovative
way to iron your garments. We all know the fuss with traditional irons:
choosing the right temperature for your tough and delicate fabrics,
waiting for the iron to warm up and cool down to avoid the risk of
damaging clothes with a too hot iron. Those hassles are things of the
past with the new Philips PerfectCare Xpress steam iron.
-
In principle, wrinkle removal is done by transferring heat to
fabric. Historically, this was done with a very hot soleplate. Then
steam was added to enhance heat transfer, thus making ironing much
faster. Our research confirmed that the best way to remove wrinkles
effectively is a perfect combination of intense steam and optimal
soleplate temperature. The key to effective wrinkle removal is the
steam, not the soleplate temperature. The soleplate temperature needs
to be just above the steam temperature to remove any moisture. This
is the optimal temperature.
EnGlish
7
Publicité
