Remington R4130 Mode D'emploi page 4

ENGLISH ENGLISH
Feature
Power System
Full Charge Time
Cordless Shave
Time
Quick Charge
Indicators
Voltage Type
Replacement
Part No.
For best shaving performance, it is recommended that you use your new shaver daily
for up to four weeks to allow time for your beard and skin to become accustomed to
the new shaving system.
CHARGING YOUR SHAVER
Always ensure that your hands, shaver and power cord are dry before charging your
shaver.
Ensure the shaver is switched off. Connect the shaver to the adapter (Fig. A), then to the
mains (Fig. B) and charge for at least 24 hours when using for the first time (Fig. C).
R7130 – Place your shaver in the charging stand, connect the charging adaptor to the stand
and then to the mains.
Charge for at least 24 hours when using for the first time.
After the shaver batteries are fully charged, the green indicator light will blink (R4130),
the fuel gauge (R5130) or the LCD display (R6130/R7130) will indicate the shaver is fully
charged.
Use product until the battery is low. This is indicated by illuminated red light or the LCD
display.
Fully recharge for 24 hours every 6 months to maintain battery condition.
When empty, the battery will be fully charged around 90 minutes for the R5130, R6130,
R7130, and around 24 hours for the R4130.
The shaver adapts automatically to a mains voltage between 100V and 240V.
2
090249_REM_IFU R4130-7130_22L.indd GB_2
R4130
Cordless
24 hours
30 minutes
No
Single green
LED for
charging
Worldwide
SP-SF
GETTING STARTED
R5130 R6130
Cord/ Cord/
Cordless Cordless
90 minutes 90 minutes
30 minutes 60 minutes
Yes Yes
Fuel gauge LCD
Worldwide Worldwide
SP-TF SP-DF
R7130
Cord/
Cordless
90 minutes
60 minutes
Yes
LCD
Worldwide
SP-DF
04.03.2009 22:37:57 Uhr