Publicité
Les langues disponibles
Les langues disponibles
Optional - Mounting the Camera
Before permanently mounting the camera:
• Determine where you will get the best view of
your baby.
• Ensure the power cable is long enough to power
the camera.
• Test your camera(s) before mounting permanently.
Make sure all power cables are at
least 3ft / 1m away from the crib
and out of reach of your child.
Use the included cable clips to help
keep power cords away from your
child. See "Using the Cable Clips" on
page 9 for installation details.
To mount your camera:
Fixed Camera
Drill 2 holes in the wall with centers exactly
1
38mm apart.
Tap anchors into holes with a hammer. Insert
2
screws 2/3 of the way.
While holding the camera base firmly in
3
place, twist the camera counterclockwise to
remove it from the base.
Reattach the base to the mounting thread on
4
the back of the camera.
Align the mounting points with the screws
5
and push the camera down.
Reattach the
camera base
here
7
Publicité
