Lorex Baby BB4300 Serie Guide De L'utilisateur page 10

P/T Camera
If wall mounting:
1
Drill 2 holes in the wall with centers exactly
26mm apart.
If ceiling mounting:
Hold the included P/T mounting plate
against the ceiling. Use a pencil to mark the
centres of the 3 mounting slots. Drill holes
where you have marked
NOTE: Make sure that the lone mounting
slot points toward the viewing area.
Viewing area
Tap anchors into holes with a hammer. Insert
2
screws 2/3 of the way.
Align the slots on the mounting plate with the
3
screws and push down to lock in place.
Tighten the screws to secure the mounting
4
plate in place.
Place the camera on the mounting plate and
5
twist clockwise to lock in place.
NOTE: For ceiling mounting, use the ceiling mounting
switch on the bottom of the P/T camera to invert the video
image.
OR
8
26mm
94mm
Ceiling mounting
switch