Legamaster PROFESSIONAL e-Screen Guide Abrégé page 5

4  Operating the monitor
The side controller of the monitor
 OSD Key Pad function List
Key Description
Power Power on/Power off
Source Source selection (toggle)

Menu Right/Volume +

Menu Left/Volume -
Menu Up

Menu Down
Menu/Exit Menu/Exit selection
 LED ON:
Power Status Condition
Green Power on
Orange Power off
Power saving mode
Select LED on via menu
(Front LED: On)
Flashing orange No signal
Off AC off
Power on
Select LED on via menu
(Front LED: Off)
 LED OFF:
The LED turns completely off when in the "off" mode
regardless of the monitor being on or off.
The Remote Control (RCU) Instructions
No Function Description
1 Turns the monitor on and off
2 INFO Provides source and resolution information
3 VGA Selects the PC RGB source
DVI Selects the PC DVI source
HDMI 1 Selects the HDMI source 1
4 COMP Selects the Component source
AV (Video) Selects the Composite Video source
HDMI 2 Selects the HDMI source 2
5 PIP position Selects the PIP position
DisplayPort Select the DisplayPort source
All manuals and user guides at all-guides.com
6 PIP
7 SWAP
8 P-SOURCE
9 MENU
10 EXIT
11 ENTER
12 SCALING
Power ON-Stand
by Indicator
Remote Control
Receiver
 Hot Key: OSD Menu Lock/Unlock Control
Display Mode
Turning the monitor on
1. Correctly insert the power cord into the monitor and
2. Ensure the AC switch is set to "—".
3. Press the power button on the remote or side control panel.
Turning the monitor off
With the power on, press the power button on the remote or
side control panel to place the monitor in a standby mode. To turn
off power completely, turn the AC switch to " " or disconnect
the AC power cord from the power outlet.
NOTE:
If there is no signal input for a period of time, the monitor will
automatically revert to standby mode.
Turns the PIP feature
on and off
S-V Selects the S-Video
source
HD-SDI 2 Not available in this
model
Swaps the main
source & sub source
picture
Selects the secondary
sub-source
Opens the monitor's
on-screen menu
system.
If the menu
system is already
open, pressing this
button will select the
previous submenu
, , , 
Navigates through
submenus and
settings
Closes the menu
system
Selects highlighted
menu choices
Toggles between different aspect ratios
(Auto, Native, 4x3, 16x9, 16x10 and Letterbox)
FREEZE Freezes the current source image
MUTE Turns off the sound
BRIGHT Adjusts the brightness
CONTRAST Adjusts the contrast
AUTO Synchronizes the monitor with the source
SOURCE Allows selection of the different sources
VOLUME- Decreases the sound volume
VOLUME+ Increases the sound volume
Lock: Press Enter, Enter, Exit, Exit, Enter and Exit
on the controller in sequence to lock OSD
Unlock: Press Enter, Enter, Exit, Exit, Enter and Exit
on the controller in sequence to unlock OSD
into the power socket
2 1
3
4
5
6
8
7
9
11 10
12
5