Publicité
Les langues disponibles
Les langues disponibles
Installation
Power & Auxiliary Wiring
Disconnect the vehicle's battery to avoid an electrical
short. Run the black ground wire to a paint-and-
corrosion-free, solid, metal area of the vehicle's
chassis or the negative battery terminal. Crimp the
provided 5/16" ring terminal to the ground wire. The
ring terminals have been left off so that power and
ground wires may be run through vehicle tubing. Do
not install the ring terminals until all wires have been
run to their final location.
Run the yellow +12V constant wire to the battery
location. Crimp the provided 15A ATC fuse to
the yellow wire, which includes a heat-shrink butt
connector. Once mechanically crimped, apply
heat to the connector to create a secure, insulated
connection. Then securely connect the fuse's 5/16"
ring terminal to the positive battery terminal. Note that
while the ring terminals can be cut off if necessary,
the fuse should always be kept within 18 inches of
the battery.
English
5
Publicité
