Egret X+ Consignes D'utilisation page 51

Entering a PIN
When you start your Egret for the first time, you will be asked to enter a four-digit PIN. The
digit that is currently active in the program flashes.
Press the 'Plus' or 'Minus' button to change the number. Press the 'On/Off' button to move
to the next number.
When you have entered all four digits of the PIN, press the 'On/Off' button. The numbers
now flash for you to check them. Press the 'On/Off' button again to confirm the PIN. Press
the 'Plus' or 'Minus' button to jump back to the first digit and change the PIN.
This PIN is now saved in your Egret. Please make a note of your PIN and keep it in a safe
place. You will need the PIN to lock your scooter and to operate the menu.
Setting up the app
After entering the PIN for the first time, your Egret will automatically be in pairing mode for
five minutes. This switches off after the five minutes or when the Egret is restarted. You can
activate the pairing mode at any time via the menu as described on page 55. If the scooter
is paired with the app, the blue radio symbol lights up.
Resetting the PIN
You can reset your PIN if you forget it. To do so, connect the scooter to your charger and
switch the scooter on. Then press the 'Plus' button and the 'Minus' button. Hold this combi-
nation for 10 seconds. You can then enter a new PIN for your Egret.
51