Publicité
Les langues disponibles
Les langues disponibles
Fault table
The paper shredder is maintenance-free and the cutting mechanism does
not need to be treated with special oil.
Storage
NOTICE!
Risk of damage!
Improper storage of the paper shredder may result in damage to
the paper shredder.
− Never store the paper shredder next to a heat source.
− Do not fold or crush the power cable.
− Only stow the paper shredder if it is dry.
− Always store the paper shredder in a clean, dry area that it is protected from direct
sunlight and is not accessible for children. Use the original packaging for storage.
Fault table
Fault
Cause
Correction
A paper
Too much
Move the slide switch
The cutting blades run in reverse and moves the
jam is
paper was fed
blocking
into the
paper back out of the paper feed slot
the paper
paper shred-
Reduce the amount of paper and switch back to
shredder.
der.
AUTO.
Disconnect the power plug
the paper residue by hand.
The shredder
There is paper
Do not move the slide switch
fails to
residue under
AUTO, as the shredder cannot be switched off
switch off
the paper
then. Feed another sheet of paper into the paper
automati-
sensor
3
.
feed slot
cally.
Disconnect the power plug
over the paper shredder. Carefully remove the
pieces of paper from the paper feed slot with
tweezers or a similar device. Be careful not to
damage the cutting blades.
15
5
to the REV position.
2
.
1
and then remove
5
from REV to
2
to clear the blockage.
1
and then turn
If you encounter faults not listed here, please contact our customer service team.
The contact information is stated on the warranty card.
Technical data
Model:
Line voltage:
Power consumption:
Protection class:
Dimensions (W × D × H):
Weight:
Volume of paper bin:
Working width:
Cutting type:
Cutting speed:
Cutting performance per operation:
Strip width:
Rated operating time:
Rated non-operating time:
Decibel:
Automatic start/stop function:
REV reverse function:
Technical changes reserved.
Technical data
DR-S1
220–240 V~, 50 Hz
190 W; 1.0 A
II
312 × 118 × 386 mm (shredder and paper bin)
312 × 118 × 86 mm (shredder)
312 × 118 × 351 mm (paper bin)
approx. 1.4 kg
approx. 7 liter
220 mm (A4)
Strip cut
2.2 m per minute
max. 6 sheets (80 g/m²)
6 mm
1-2 minutes
30 minutes
approx. 70 dB
yes
yes
16
Publicité
