Publicité
Les langues disponibles
Les langues disponibles
TO LUBRICATE THE DECK
ATTENTION! To reduce the risk of electrical shock, always remove
the cable from the socket immediately after use and before
cleaning.
1 - Raise the belt from the edge of one of the sides and clean the
deck and belt by wiping a dry cloth over the deck and in internal
surface of the belt. Move the belt backwards with the foot to clean
the belt along its full length. Repeat on the other side of the belt.
2 - Place the vial between the belt and the board and hold the vial
inclined.
3 - Apply a trickle of silicone from the front to the back of the
treadmill on each side. Try to reach the center of the deck.
4 - Spread the silicone by running the treadmill at 1km/h(0.6 mph)
and step delicately on the treadmill for some minutes to enable the
silicone to spread on the belt.
08
Publicité
