Turning On; Call Feature; Making A Call; Answering A Call - Marmitek BOOMBOOM 560 Guide Utilisateur

TURNING ON

Press the POWER button for 5 seconds. The BoomBoom 560 will
produce a "beep" tone. The blue LED lights will start flashing rapidly.
The BoomBoom 560 will then automatically link to the last device it
was connected to. When connected, the blue LED lights will start to
flash at a slow rate. Only one device can be connected at the same
time to the BoomBoom 560. If your device does not connect
automatically, go to the device's Bluetooth settings and select the
BoomBoom 560. A connection will then be made.

CALL FEATURE

MAKING A CALL

When making a call from your mobile phone, the call will (depending
on the phone settings) be transferred to your headphone
automatically once a connection has been made.

ANSWERING A CALL

Press the power button [6] briefly to accept the call. The music will be
paused and the call will be transferred.

ENDING A CALL

Press the power button [6] briefly or end the call on your phone. The
music will continue to play automatically.

BATTERY RUNNING LOW

When the battery of the BoomBoom 560 is running low, you will hear
an audio warning. After 3 to 5 minutes the BoomBoom 560 will
automatically switch off. Follow the steps as described earlier to
recharge the battery.
8 © MARMITEK