Connecting With An Audio Cable - Marmitek BOOMBOOM 560 Guide Utilisateur

CONNECTING WITH AN AUDIO
CABLE
The Bluetooth connection can be switched to a wired connection by
plugging the cable into the 3.5mm audio jack. This may be useful
when the battery has run out and you still want to use headphones.
Press and hold the power button for 4 seconds to turn OFF the
BoomBoom 560 if it is still on. Now, use the supplied audio cable to
connect the BoomBoom 560 to the headphones connector of your
audio source. It is not possible to use the function keys in the wired
connection mode. Simply detach the 3.5mm audio connector and
press the power button for 4 seconds to return to the Bluetooth
connection.
BOOMBOOM 560
9