seeger SAC7000 Mode D'emploi page 8

6.2 Using the timer
When the appliance is switched on, the timer works as a shut of timer and vice-versa.
5
To cancel the timer, press the power button or press the arrow buttons repeatedly until
5
the display shows '00'.
1. Press the timer button to switch on the timer function.
2. Use the arrow buttons to set the timer. The display shows the set time.
6.3 Storage
1. Unplug the power cable and the window kit.
2. Drain the water from the appliance.
3. Clean the filter.
4. Store the appliance in an upright position in a dry place.
7 CLEANING AND MAINTENANCE
6 Turn the appliance off and remove the main plug out the socket before you start
cleaning the device.
6 It is not permitted to open the product yourself or to have it opened, neither is it
permitted to repair the product yourself or to have it repaired. This will void the
warranties. Let any maintenance be carried out by certified maintenance personnel.
• Clean the outside of the appliance with a soft cloth. When the appliance is very dirty,
dampen the cloth slightly with water and a neutral solution.
7.1 Draining the appliance
See image 3.
Draining is only needed in dry mode.
5
The appliance shuts off automatically when the reservoir is full.
5
You can also drain the appliance automatically by attaching a drain hose to the drain.
5
Place a drain reservoir on a lower level than the drain.
1. Carefully place the appliance above a sink.
2. Open the drain.
3. When the appliance is drained, close the drain.
7.2 Cleaning the filters
6 Do not touch the evaporation filter with bare hands.
1. Remove both filters from the appliance.
2. Clean the filter with a vacuum cleaner.
8