Pleasant Hearth HWS-227202 Mode D'emploi page 3

Pedestal Base and Leg Installation
Before Installing Stove, Follow These Steps for
Pedestal Base and leg Installation.
Model: HWS-227202
Medium Wood Stove w/Pedestal Base
Pedestal base is pre-installed at the factory. No action is
required.
Model: LWS-127201
Medium Wood Stove w/Legs
Remove ash pan and (4) bolts in angle iron bracket as
shown in Figure 0.1.
With assistance, lift stove off of wooden pallet and lay
stove on its side on a safe, elevated, padded and level
platform that is about 6" off the ground.
Using the bolts that were removed in step 1, bolt each
leg to the bottom of the stove as shown in Figure 0.2.
With assistance, lift the stove off of the raised platform,
set upright on the legs and re-install the ash pan.
When stove is in place for installation, make sure stove is
level by adjusting the leg levelers shown in Figure 0.3.
Figure 0.3
Figure 0
ash pan
Figure 0.1
Figure 0.2
leg leveler
2