Microgard 3681 Guide Rapide

Difficulty Rating
Note de difficulté
Calificación de dificultad
Application: Application: Aplicación:
Acura Legend
Installation Bulletin
Bulletin d'installation
Boletín de Instalación
Location of cabin filter:
Under the dash behind the glove compartment assembly on the
passenger side of the vehicle.
To remove existing filter:
1. Remove the dashboard lower cover and disconnect the
connector from it.
2. Disconnect the glove compartment light connector and the
glove compartment mounting bolts. Then remove the glove
compartment.
3. Remove both dashboard right end cap and the left side pane in
the glove compartment opening.
4. Remove the glove compartment frame mounting bolts and nuts,
then remove the glove compartment frame.
5. Remove the bracket bolts and screw, then remove the filter.
6. Reverse procedure to install new filter.
7. Make sure that there is no air leakage.
3681
11-10