Publicité
Les langues disponibles
Les langues disponibles
11. Lock / Unlock the quantity of available channels in multichannel remote controls
11A. Lock channels
11A.1
11A.2
Choose the
Press STOP and
number of
RIGHT arrow for
maximum channels
5 sec.
desired
12. Motor turn on / off
Motor do not receive orders from remotes while it is turned off. The Motor is on if pressing the SET button light briefly.
12A. Turn off
12A.2
12A.1
7"
Press SET for
Motor will turn
7 sec.
slightly after 1 sec.
Factory reset
The time between operations must be lower than 10 seconds or the motor will leave the setting mode
Factory reset will delete: Intermediate positions, Limits, Remote controls / Channels, Turn direction and Mode selected.
13A. Factory reset from the remote control
13A.1
13A.2
5"
Press STOP for
Motor will turn
5 sec.
slightly
13B. Factory reset from the motor
13B.1
13B.2
3"
x2
Press SET for
Press SET for
twice
twice for 3 sec.
Warnings
Electric risk
Entrapment risk
Keep away from liquids and corrosive materials
Troubleshooting
Problems
Motor does not work or do it slowly
www.neroxdomo.com
11B. Unlock channels
11A.3
11B.4
5"
MAX. QUANTITY
Select any channel
OF CHANNELS
locked
12A.3
x3
1"
7"
LED will bright 3
MOTOR off
times after 7 sec.
13A.3
13A.4
x2
7"
Press SET in RC
Motor will turn
for 7 sec.
slightly 2 times
13B.3
13B.4
x2
3"
LED light will bright
Motor will turn
after 3 sec.
twice slightly after
3 sec.
Do not hit motor
Causes
A - Overloading.
B - Incorrect installation.
C - Battery discharged.
D - Motor off.
E - Motor reached one of the limits.
PULSE
11B.5
5"
Press STOP and
RIGHT arrow for
5 sec.
12B. Turn on
12B.1
1"
Press SET for
1 sec.
13A.5
FACTORY RESET
done
13B.5
FACTORY RESET
done
Do not drill motor
9 13
/
25
BAT USB
installation manual
11B.5
MAX. QUANTITY
OF CHANNELS
unlocked
12B.2
12B.3
LED will bright
MOTOR
once
on
Solutions
A - Check weight of the blind.
B - Check components.
C - Charge battery.
D - Turn on motor.
E - Press opposite direction button.
5 YEARS WARRANTY
ENG
Publicité
