Before starting...
The motor has 2 electronic Limits and 4 optional
Intermediate Positions programmable from remote control.
The First Limit can be defined as Upper or Lower limit.
The minimum distance between Limits and Intermediate
Positions is 30 cm.
When the two Limits have been programmed the motor
automatically switches to "Continuous Mode".
Intermediate Positions can only be added when the 2
Limits have been programmed and can only be operated in
"Continuous Mode".
Basic settings
The time between operations must be lower than 10 seconds or the motor will leave the setting mode
1. Remote control / Channel setting
If a Multichannel Remote control is used, choose the channel first
1.1
1.2
1"
Press SET
Motor will turn
for 1 sec.
slightly
2. Changing turn direction (only if needed)
2.1
2.2
5"
Press STOP for
Motor will turn
5 sec.
slightly
3. Setting 1st limit
3.1
3.2
1"
SET
Remove the cover
Press SET in RC
to have access to
for 1 sec.
button SET
4. Setting 2nd limit
4.1
4.2
1"
Move until reach
Press SET in RC
the desired height
for 1 sec.
www.neroxdomo.com
1.3
1.4
Press UP once
Motor will turn
slightly
2.3
2.4
Press DOWN once
Motor will turn
slightly
3.3
3.4
Motor will turn
Move until reach
slightly
the desired height
4.3
4.4
Motor will turn
Press UP or
slightly
DOWN to select
whether the second
limit is the upper or
lower limit
PULSE
In "Continuous Mode" when the UP/DOWN button of the
remote control is pressed the motor moves constantly until
the next Intermediate Position or Limit is reached. If the UP/
DOWN button is pressed twice the motor will not stop at
any Intermediate Position.
In "Pulse Mode" when the UP/DOWN button of the remote
control is pressed the motor moves in short movements. If
the UP/DOWN button is long pressed the motor will move
continuosly.
1.5
REMOTE /
CHANNEL
added
2.5
TURN DIRECTION
changed
3.5
3.6
Press UP or
Press SET in RC
DOWN to select
for 1 sec.
whether the first
limit is the upper or
lower limit
4.5
4.6
1"
Press SET in RC
Motor will turn
for 1 sec.
slightly
7 13
/
25
BAT USB
installation manual
3.7
3.8
1"
Motor will turn
1st LIMIT
slightly
programmed
4.7
2nd LIMIT
programmed
5 YEARS WARRANTY
ENG