Publicité
Les langues disponibles
Les langues disponibles
Connecting peripheral equipment
Video recorder
Other equipment
Amplifier
4
5
6
7
8
9
Á
Ø
0
16
All manuals and user guides at all-guides.com
Carry out the connections shown opposite, using a good
quality euroconnector cable.
If your video recorder does not have a euroconnector socket, the
only connection possible is via the aerial cable.You will therefore
need to tune in your video recorder's test signal and assign it
programme number 0 (refer to manual store, p. 6).
To reproduce the video recorder picture, press
Video recorder with decoder
Connect the decoder to the second euroconnector socket
of the video recorder.You will then be able to record
scrambled transmissions.
Satellite receiver, decoder, CDV, games, etc.
Carry out the connections shown opposite.
Use a digital audio connecting cable and connect the
television's "DIGITAL AUDIO OUT" output to a "DIG IN"
input on the amplifier (amplifier with coaxial digital input).
To select connected equipment
n
Press the
key to select EXT1 and AV for connections on the
front panel.
Most equipment (decoder, video recorder) carries out the switching itself.
0
.
Publicité
