Philips Sonicare FS1000 Mode D'emploi page 13

2
Charger insertion and removal instructions
To remove the charger
4235_021_1633_1_DFU-Luxury_A6_v1.indd 13
All manuals and user guides at all-guides.com
1 2 Once filled, press the eject button to release
the AirFloss handle and the handle cup (if the
eject button is pressed before the pump stops,
the pump shuts off automatically but your
AirFloss handle reservoir may not be full).
3 Remove the AirFloss handle and begin using
your AirFloss.
4 In order to minimize time for your daily oral
care routine, we suggest you refill your AirFloss
handle immediately after use so that it is ready
immediately for the following day's routine.
Your Fill & Charge station charger can be removed
and used separately as a standalone charger for
your AirFloss and many other Philips Sonicare
toothbrush handles.
1 Remove the reservoir from the Fill & Charge
station base.
2 Place the Fill & Charge station base upside
down or on its side.
3 Pull the charger cord from the bottom of the
base and pull the charger out.
13
English
17/11/16 14:30