Philips Sonicare FS1000 Mode D'emploi page 10

10
4235_021_1633_1_DFU-Luxury_A6_v1.indd 10
All manuals and user guides at all-guides.com
English
2 Identify if you are using the original AirFloss or
AirFloss Pro:
a The original AirFloss (type number HX81XX
b AirFloss Pro (type number HX83XX found
3 Remove the reservoir door from your existing
AirFloss or AirFloss Pro handle by opening
the door, grabbing the door by the base, and
twisting.
4 Insert your new reservoir door (the smaller
door included is for the original AirFloss and
the larger door is for AirFloss Pro) by:
a Inserting the tube into the handle reservoir
b Placing one pin of the door hinge into one
c Grabbing the door at the base and twisting
d Test the door by opening and closing. You
or HX82XX found on bottom of handle) will
only have (1) LED on the handle.
on bottom of handle) will have (3) LEDs on
the handle, and will have a metallic accent
ring just below where the nozzle connects
to the handle.
with the tube facing up.
side of the handle just beneath the door
opening.
until the door snaps into place.
should feel resistance when opening and
closing.
17/11/16 14:30