Publicité
Les langues disponibles
Les langues disponibles
Step 18
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE
INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
WARNING
Serious or fatal crushing injuries can occur from furniture tipover.
To prevent tipover:
* Install tipover restraint provided
* Place heaviest items in the lowest drawers
* Unless specifically designed to accommodate, do not set
TVs or other heavy objects on the top of this product
* Never allow children
to climb or hang on
drawers, door, or
shelves
* Never open more
than one drawer at a
time
Use of tipover
restraints may only
reduce, but not
eliminate the risk of
tipover
OPTION 1: Attachment into a wall stud (preferred method)
Using a stud finder, locate a stud in the wall. Place your unit against the wall, with the safety bracket
aligned in this location. To make driving the screw easier, you can drill a 1/8" diameter pilot hole (3mm)
through the safety bracket into the stud. Drive the screw through the safety bracket into the wall stud.
Tighten the screw that was not fully tightened in step 1.
OPTION 2: Attachment into drywall
Locate your unit where desired against a wall and mark the wall through the safety bracket, then move
your unit aside. Drill a 3/16" diameter hole (5mm) into the wallboard. Tap the wall anchor into the hole
until it is flush. Move your unit into location and fasten the wall bracket to the wall anchor with the
screw. Tighten the screw that was not fully tightened in step 1.
littleseedskids.com
11c
11d
x1
#A84050
hole
agujero
trou
11d
11c
27
For Masonry, Concrete,
or other wall materials:
Consult your local
hardware store for
appropriate anchors to
securely attach the safety
bracket.
stud
montante
planche
wallboard
muro
mur
Publicité
