NEROXDOMO ECO 35 Serie Manuel D'installation page 9

Warnings
The motor has internal protections to avoid overheating and it will
stop after working continuosly for 4-6 min. or its internal temperature
will rise 110ºC. The motor will remain inactive 3-10 min. to cool down
Do not use electrical screwdriver
to adjust the limits
Electric risk Entrapment risk
Keep away from liquids and corrosive materials
Troubleshooting
Problems
Motor does not work or do it slowly.
Motor stops suddenly.
Motor only works in one direction.
By pressing UP or DOWN buttons the fabric moves in
the opposite direction.
www.neroxdomo.com
Use only the supplied tool to adjust the limits
Do not hit motor Do not drill motor
Causes
A - Incorrect voltage.
B - Overloading.
C - Incorrect installation.
A - Overheating.
B - Power failure
C - Motor reached one of the limits.
A - Motor reached the limit of the direction that
does not work.
A - Wrong wiring.
9 13 /
ECO 35 & ECO
installation manual
Put cable downward to
avoid water inflow
Solutions
A - Check voltage.
B - Check blind weight.
C - Check components.
A - Let motor cools.
B - Check power supply.
C - Press opposite direction button.
A - Set the limit corresponding to that
direction.
A - Swap the black and brown wires in the
switch connection.
5 YEARS WARRANTY
45
ENG