Publicité
Les langues disponibles
Les langues disponibles
TECHNICAL CHARACTERISTICS
Steam compartment ............ Stainless steel
Temp. MAX ........................
MAX pressure ..................... 5 bars
Water tank ........................
Power consumption ............ 2000W
Intensity ........................... 9.0 A
Voltage ...........................
Net weight (empty) ...............
FILLING
Before filling the Steamer with water, turn it off and unplug it. Make
sure there is no more steam by unlocking the steam trigger in the
"on" position. Always cool Steamer for 10 minutes before adding
water.
1
Remove the filler cap by turning counterclockwise.
2
Fill the water tank using the funnel and measuring
cup provided. The maximum capacity of the tank is
1.8 L. Tip: Do not overfill the tank.
3
Replace the filler cap by turning clockwise until a
good seal is achieved.
160 °C
2L
230 V
4.8 kg
7
EN
Publicité
