Klarstein 10017164 Mode D'emploi page 13

Screen
1. Cooling mode indicator
2. Dehumidifying mode indicator
3. Timer mode indicator
4. Compressor running indicator
5. Temperature display
6. Sleeping mode indicator
7. Water full indicator
8. Fan mode indicator
9. Low fan speed
10. High fan speed
Remote Control
1. Power
2. Timer
3. Down
4. Mode
5. Up
6. Fan
7. Sleep
Cooling mode
• After machine turns on, default value is cooling mode with 22℃ and low fan speed.
• Press " MODE" to select cooling mode, cooling mode indictor turns on .
• Press " UP" or " DOWN" to adjust temperature ( from 16℃ to 31℃).
• Press " FAN" to select high or low fan speed.
Heating mode
• Press "MODE" to select heating mode, heating mode indicator turns on.
• Press " UP" or " DOWN" to adjust temperature ( from 16℃ to 31℃).
• Press " FAN" to select high or low fan speed.
Note: When heating mode works, if don't want to empty the water-tank under this mode, please connect
a water-drainage-pipe to remove the water out continuously.
Fan mode
• Press " MODE" to select fan mode, fan mode indicator turns on .
• Press " FAN" to select high speed or low speed.
• Temperature and sleeping function cannot be setup.
Timer mode
• Under standby mode, press "TIMER" to setup the power-on time. Timer indicator turns on.
• Under power-on mode, press "TIMER" to setup power-off timer. Timer indicator turns on.
Dehumidifying mode
• Press "MODE" to select dehumidifying mode, dehumidifying mode indicator turns on .
• Under dehumidifying mode, sleeping function cannot be setup, and fan speed is low.
13
Operation Methods